[1] Amelya A, Kim JE, Woo CW, et al.Load-bearing capacity of posterior CAD/CAM implant-supported fixed partial dentures fabricated with different esthetic materials[J]. Int J Prosthodont, 2019, 32(2): 201-204. [2] Najeeb S, Zafar MS, Khurshid Z, et al.Applications of polyetheretherketone(PEEK) in oral implantology and prosthodontics[J]. J Prosthodont Res, 2016, 60(1): 12-19. [3] Mourya A, Nahar R, Mishra SK, et al.Stress distribution around different abutments on titanium and CFR-PEEK implant with different prosthetic crowns under parafunctional loading: a 3D FEA study[J]. J Oral Biol Craniofac Res, 2021, 11(2): 313-320. [4] 于文倩, 李晓茜, 陈思艺, 等. 上部结构材料对无牙下颌种植固定修复影响的三维有限元分析[J]. 中华口腔医学杂志, 2021, 56(2): 190-195. [5] Heboyan A, Lo Giudice R, Kalman L, et al.Stress distribution pattern in zygomatic implants supporting different superstructure materials[J]. Materials (Basel), 2022, 15(14): 4953-4965. [6] Villefort RF, Diamantino PJS, Zeidler SLVV, et al.Mechanical response of PEKK and PEEK as frameworks for implant-supported full-arch fixed dental prosthesis: 3D finite element analysis[J]. Eur J Dent, 2022, 16(1): 115-121. [7] Almeida EO, Rocha EP, Freitas Júnior AC, et al.Tilted and short implants supporting fixed prosthesis in an atrophic maxilla: a 3D-FEA biomechanical evaluation[J]. Clin Implant Dent Relat Res, 2015, 17(Suppl 1): e332-e342. [8] Coelho LF, Broilo JR, Sartori EA, et al.Stress distribution study using the finite element method in three different implant-supported fixed complete-arch mandibular prostheses[J]. Int J Prosthodont, 2016, 29(3): 299-302. [9] Dal Piva AMO, Tribst JPM, Borges ALS, et al.CAD-FEA modeling and analysis of different full crown monolithic restorations[J]. Dent Mater, 2018, 34(9): 1342-1350. [10] 张勇, 吴正敏, 陈溯. 聚醚醚酮支架对All-on-4远中倾斜种植体应力影响的三维有限元分析[J]. 北京口腔医学, 2021, 29(5): 309-312. [11] Tribst JPM, Dal Piva AMO, Lo Giudice R, et al.The influence of custom-milled framework design for an implant-supported full-arch fixed dental prosthesis: 3D-FEA sudy[J]. Int J Environ Res Public Health, 2020, 17(11): 4040-4052. [12] 高远, 陈杰, 王高琦, 等. 种植体-基台连接设计对基台与基台螺丝受力影响的三维有限元分析[J]. 上海口腔医学, 2021, 30(5): 481-487. [13] Soboyejo WO, Shen W, Srivatsan TS.An investigation of fatigue crack nucleation and growth in a Ti-6Al-4V/TiB in situ composite[J]. Mech Mater, 2004, 36(1-2): 141-159. [14] 曹聪, 满毅. 种植体中央螺丝折断的风险防范及治疗考量[J]. 口腔医学, 2023, 43(1): 24-27. [15] Massoumi F, Taheri M, Mohammadi A, et al.Evaluation of the effect of buccolingual and apicocoronal positions of dental implants on stress and strain in alveolar bone by finite element analysis[J]. J Dent (Tehran), 2018, 15(1):10-19. |