种植义齿固定螺丝孔微渗漏原因分析

上海口腔医学 ›› 2013, Vol. 22 ›› Issue (3): 287-290.

种植义齿固定螺丝孔微渗漏原因分析

张敏，郑苍尚

(深圳市第二人民医院口腔科，广东深圳 518035)

收稿日期:2012-12-04 修回日期:2013-01-10 出版日期:2013-06-10 发布日期:2013-06-10
通讯作者: 郑苍尚,Tel:0755-83366388-2107,Fax：0755-83293366, E-mail:zhengcangshang@163.com
作者简介:张敏(1976-)，女，硕士，主治医师, E-mail:386897858@qq.com

Factorial analysis of microleakage at the fixation screw pores of implant denture

ZHANG Min, ZHENG Cang-shang

Department of Stomatology, The Second People’s Hospital of Shenzhen City. Shenzhen 518035, Guangdong Province, China

Received:2012-12-04 Revised:2013-01-10 Online:2013-06-10 Published:2013-06-10

摘要/Abstract

摘要： 目的：比较4种光固化复合树脂对种植义齿固定螺丝孔的封闭效果，观察有机硅烷偶联剂对固定螺丝孔微渗漏的影响，分析冷热循环试验对固定螺丝孔微渗漏的影响。方法：制备80个钛合金中空半圆柱状试件(上1/2表面烤瓷，内表面喷砂+酸蚀处理)，分为偶联剂和非偶联剂组，分别用4种光固化树脂进行封闭，各组再作对比冷热循环试验。用葡萄糖氧化酶-过氧化物酶法(GOD-POD)测量微渗漏情况,采用SAS 11.10软件包对数据进行方差分析。结果：4种光固化复合树脂间、偶联剂组与非偶联剂组间、冷热循环组与对照组间微渗漏均有显著差异(P<0.01)。在对封闭材料(A因素)、偶联剂处理(B因素)、冷热循环试验(C因素)三因素的交互作用分析中发现，只有B因素与C因素间具有交互作用(P<0.01)；AB间、AC间、ABC间则均无交互作用(P>0.05)。结论：封闭材料是影响固定螺丝孔微渗漏的一个重要因素。使用偶联剂可有效减少黏结界面的微渗漏，实验试件对冷热循环试验的耐受性差。

关键词: 种植义齿, 固定螺丝孔, 微渗漏, 葡萄糖氧化酶-过氧化物酶法, 偶联剂

Abstract: PURPOSE: The purpose of this study was to evaluate closure of the fixation screw pores of implant denture by using 4 different light-cured composite resins (LCRs), and to observe the effects of organosilane and thermocycling on microleakage. METHODS: A total of 80 hollow semi-cylinders were fabricated with titanic alloy, with the upper half of the specimens was porcelain, and the internal surfaces were sandblasted and etched. All specimens were divided into 2 groups: treated and not treated with organosilane. After bonding with 4 kinds of LCRs, the testing samples were assigned into 2 subgroups for different thermocycles. Then the degree of microleakage were measured by glucose oxidase-peroxidase(GOD-POD) methods. The results were statistically analyzed with one-way ANOVA by using SAS 11.10 software. RESULTS: Statistical analysis revealed that the microleakage associated with LCRs were significantly different, and the microleakage associated with organosilane or thermocycles were also significantly different (P<0.01). Interactive analysis showed that there was interaction between the organosilane disposal (factor B) and thermocycling disposal (factor C) (P<0.01), whereas no interaction was found between the other factors (P>0.05). CONCLUSIONS: The results suggest that the type of bonding materials would affect the degree of microleakage, and the microleakage can be reduced if the specimens are treated with organosilane. The tolerance of specimens under thermocycling are very poor.

Key words: Implant denture, Fixation screw pores, Microleakage, Glucose oxidase-peroxidase, Organosilane

中图分类号:

R782.12

张敏, 郑苍尚. 种植义齿固定螺丝孔微渗漏原因分析[J]. 上海口腔医学, 2013, 22(3): 287-290.

ZHANG Min, ZHENG Cang-shang. Factorial analysis of microleakage at the fixation screw pores of implant denture[J]. Shanghai Journal of Stomatology, 2013, 22(3): 287-290.

参考文献

[1] Sharp B, Morton D, Clark AE. Effectiveness of metal surface treatments in controlling microleakage of the acrylic resin-metal framework interface[J]. J Prosthet Dent, 2000, 84(6): 617-622.
[2] Koyuturk AE, Akca T, Yucel AC, et al. Effect of thermal cycling on microleakage of a fissure sealant polymerized with different light sources[J]. Dent Mater J, 2006, 25(4): 713-718.
[3] 徐琼,樊明文,范兵.葡萄糖定量分析根管微渗漏模型的建立[J]. 现代口腔医学杂志, 2003, 17(3): 215-217.
[4] Güler AU, Yilmaz F, Ural C, et al. Evaluation of 24-hour shear bond strength of resin composite to porcelain according to surface treatment[J]. Int J Prosthodont, 2005, 18(2): 156-160.
[5] Cobb DS, Vargas MA, Fridrich TA, et al. Metal surface treatment: characterization and effect on composite-to-metal bond strength[J]. Oper Dent, 2000, 25(5): 427-433.
[6] Schmage P, Nergiz I, Herrmann W, et al. Influence of various surface-conditioning methods on the bond strength of metal brackets to ceramic surfaces[J]. Am J Orthod Dentofacial Orthop, 2003, 123(5): 540-546.
[7] Brentel AS, Ozcan M, Valandro LF, et al. Microtensile bond strength of a resin cement to feldpathic ceramic after different etching and silanization regimens in dry and aged conditions[J]. Dent Mater, 2007, 23(11): 1323-1331.
[8] 陈冶清. 口腔材料学[M]. 北京: 人民卫生出版社,2002:356-359.
[9] Giachetti L, Scaminaci Russo D, Bambi C, et al. A review of polymerization shrinkage stress: current techniques for posterior direct resin restoration[J]. J Contemp Dent Prac,2006,7(4): 79-88.
[10] 陈世容, 瞿晚星, 徐卡秋. 硅烷偶联剂的应用进展[J]. 有机硅材料, 2003, 17(5): 28-31.

[1]	杨华旋, 陈任生, 黄家辉, 孔海影, 张林林. 铒激光预处理对牙本质、牙釉质粘结强度及CAD/CAM玻璃陶瓷嵌体修复牙体缺损边缘微渗漏的影响[J]. 上海口腔医学, 2024, 33(3): 245-249.
[2]	侯秀秀, 苑克勇, 黄正蔚, 马瑞. Er:YAG激光和Nd:YAG激光辅助的牙漂白对树脂充填体粘接强度和边缘微渗漏的影响[J]. 上海口腔医学, 2023, 32(4): 351-355.
[3]	黄文青, 李羽, 杨健. 不同预处理方法对龋齿牙本质微渗漏和粘结效果的影响[J]. 上海口腔医学, 2021, 30(6): 585-588.
[4]	江磊, 邱洁, 卢雅宏, 陈红, 沈叶鑫, 林志辉, 方洁, 张长源. 超声龈上洁治术对全瓷冠边缘微渗漏的影响[J]. 上海口腔医学, 2020, 29(1): 36-39.
[5]	陈敏慜, 寇鹏, 谢晓莉, 王祥柱, 侯冬兰. 不同根管湿润度及充填方法对iRoot sp封闭性能的影响[J]. 上海口腔医学, 2018, 27(5): 467-471.
[6]	王燕, 张雪健, 尹传蓉, 邓悦, 王万春. 24例磨牙压低及种植义齿修复长期疗效观察[J]. 上海口腔医学, 2018, 27(4): 430-432.
[7]	韩艳彦，伍甜甜，朱亚琴. 过氧化氢酶对外漂白后树脂充填体边缘微渗漏的影响[J]. 上海口腔医学, 2018, 27(3): 235-238.
[8]	张宁, 李鑫, 苗雷英, 吴娟, 葛久禹, 刘超, 杨卫东. 生物根管封闭剂iRoot SP在根管根尖封闭中的应用评价[J]. 上海口腔医学, 2017, 26(4): 395-398.
[9]	朱晸, 朱亚琴. 3种复合树脂充填V类洞的微渗漏比较研究[J]. 上海口腔医学, 2017, 26(3): 241-245.
[10]	戴小锋, 包立, 余优成, 施乐. 上颌窦区骨量不足3 mm植骨后同期种植临床效果分析[J]. 上海口腔医学, 2017, 26(3): 290-292.
[11]	潘秋华, 黄大维, 王青泰. 止血剂对乳牙牙本质黏结强度的影响[J]. 上海口腔医学, 2017, 26(2): 184-187.
[12]	钟群, 彭艳, 邬雪颖, 翁佳炜. 反复烧结对选择性激光熔覆钴铬合金烤瓷冠边缘微渗漏的影响[J]. 上海口腔医学, 2016, 25(6): 663-667.
[13]	彭艳, 钟群, 邬雪颖, 翁佳炜. 不同边缘设计对选择性激光熔覆钴铬合金基底冠边缘微渗漏的影响[J]. 上海口腔医学, 2016, 25(6): 668-672.
[14]	赵聪, 迟爽, 李彤, 李贺, 李天博, 张志民. MMPs抑制剂对湿性黏结微渗漏的影响[J]. 上海口腔医学, 2016, 25(5): 548-552.
[15]	曲贞珍, 李晓光, 王青. 桩道预备后剩余根管充填物的根尖封闭作用评价[J]. 上海口腔医学, 2016, 25(5): 560-565.