不同颜色与厚度的2种玻璃陶瓷修复体对光固化灯透射光学性能的影响

doi:10.19439/j.sjos.2020.01.003

上海口腔医学 ›› 2020, Vol. 29 ›› Issue (1): 13-18.doi: 10.19439/j.sjos.2020.01.003

不同颜色与厚度的2种玻璃陶瓷修复体对光固化灯透射光学性能的影响

林泓磊^1,2,*, 李麒^1,3,*, 于皓^1,2,3, 黄正⁴, 郑明^1,2,3, 程辉^1,2,3

1.福建医科大学口腔医学院,福建福州 350004;
2.福建医科大学附属口腔医院,福建福州 350002;
3.福建医科大学口腔生物力学及美学研究中心,福建福州 350004;
4.福建师范大学医学光电科学与技术教育部重点实验室,福建福州 350004

收稿日期:2018-07-11 出版日期:2020-02-25 发布日期:2020-03-09
通讯作者: 郑明,E-mail: zmdentist@163.com
作者简介:林泓磊（1984-）,男,硕士,住院医师,E-mail: linhonglei@foxmail.com; 李麒（1992-）,男,在读硕士研究生,E-mail: 330927658@qq.com。^*并列第一作者
基金资助:
福建卫生系统中青年骨干人才培养项目（2013-ZQN-ZD-23）; 福建卫生计生委青年科研课题（2015-2-15）

Optical properties of LED light curing unit before and after transmitting different colors and thickness of two kinds of glass ceramics

LIN Hong-lei^1,2, LI Qi^1,3, YU Hao^1,2,3, HUANG Zheng⁴, ZHENG Ming^1,2,3, CHENG Hui^1,2,3

1.School of Stomatology, Fujian Medical University. Fuzhou 350004;
2.Hospital of Stomatology, Fujian Medical University. Fuzhou 350002;
3.Research Centre of Dental Biomechanics and Aesthetic, Fujian Medical University. Fuzhou 350004;
4. Key Laboratory of Optoelectronic Science and Technology for Medicine of Education, Fujian Normal University. Fuzhou 350004, Fujian Province, China

Received:2018-07-11 Online:2020-02-25 Published:2020-03-09

摘要/Abstract

摘要： 目的：研究不同种类、颜色与厚度玻璃陶瓷修复体对口腔常用光固化灯的透射玻璃陶瓷后透射光光学性能的改变。方法：用CAD/CAM技术制作二硅酸锂基玻璃陶瓷和白榴石增强型玻璃陶瓷圆片试件,每种玻璃陶瓷选择颜色为A2和A3,共分为4组。每组制作厚度为0.5~4.0mm的圆片共8个,总计32个。收集2台全新LED光固化灯,用光谱辐照度计和光功率计（积分球标定精度）测量2台光固化灯3种功率模式下的中心波长和光强,以及透射玻璃陶瓷圆片后透射光的中心波长和光强。采用SPSS 25.0软件包对数据进行统计学分析。结果：不同光固化灯功率模式、玻璃陶瓷不同类型、颜色的透射光中心波长有显著差异（P<0.05）;不同光固化灯功率模式、玻璃陶瓷不同类型、颜色、厚度的透射光光强有差异（P<0.05）。结论：光固化灯的功率模式,玻璃陶瓷的类型和颜色对透射光的中心波长有影响,玻璃陶瓷的厚度对透射光的中心波长无影响。光固化灯的功率模式,玻璃陶瓷的类型、颜色、厚度对透射光的光强有影响;其中,玻璃陶瓷厚度对透射光的光强衰减影响最显著。

关键词: LED光固化灯, 中心波长, 光强, 玻璃陶瓷, 颜色, 厚度

Abstract: PURPOSE: To study the optical properties of two common dental light curing units and the optical properties of the transmitted light after transmitting glass ceramics. METHODS: Two types of glass-ceramic disc named IPS e.max CAD and IPS Empress CAD were produced by CAD/CAM technology, and the colors of A2 and A3 were chosen for each type of glass ceramic, then divided into 4 groups. Eight discs were made 0.5 mm to 4.0 mm thick in each group, the total number was 32. Spectra irradiance meter and power meter were used to measure the central wavelengths and irradiance of 3 power modes of 2 new LED light curing units before and after transmitting glass-ceramic discs. Statistical analysis was performed using SPSS 25.0 software package. RESULTS: Under different power modes of light curing units, different types and colors of glass ceramics, the central wavelengths of transmitted light were significantly different (P<; 0.05). Under different power modes of light curing units, different types, colors and thicknesses of glass ceramics, the irradiance of transmitted light was significantly different (P<; 0.05). CONCLUSIONS: The power mode of light curing unit, the type and color of the glass ceramic have influence on the central wavelength of the transmitted light, but the thickness of the glass ceramic has no influence on the central wavelength of the transmitted light. The power mode of the light curing unit, the type, color, and thickness of the glass ceramic have influence on the irradiance of the transmitted light, in which glass ceramic thickness has the most significant effect on the attenuation of the irradiance of the transmitted light.

Key words: LED light curing unit, Central wavelength, Irradiance, Glass ceramic, Shade, Thickness

中图分类号:

R783.1

林泓磊, 李麒, 于皓, 黄正, 郑明, 程辉. 不同颜色与厚度的2种玻璃陶瓷修复体对光固化灯透射光学性能的影响[J]. 上海口腔医学, 2020, 29(1): 13-18.

LIN Hong-lei, LI Qi, YU Hao, HUANG Zheng, ZHENG Ming, CHENG Hui. Optical properties of LED light curing unit before and after transmitting different colors and thickness of two kinds of glass ceramics[J]. Shanghai Journal of Stomatology, 2020, 29(1): 13-18.

参考文献

[1] Öztürk E, Bolay S, Hickel R, et al.Shear bond strength of porcelain laminate veneers to enamel, dentine and enamel-dentine complex bonded with different adhesive luting systems[J]. J Dent, 2013, 41(2): 97-105.
[2] Kuguimiya RN, Rode KM, Carneiro PM, et al.Influence of curing units and indirect restorative materials on the hardness of two dual-curing resin cements evaluated by the nanoindentation test[J]. J Adhes Dent, 2015,17(3): 243-248.
[3] 林晓丽, 于皓, 林泓磊, 等. 口腔临床5种常用光固化灯光学性能的研究[J]. 口腔医学研究, 2016, 32(4): 383-387.
[4] Dozic A, Kleverlaan CJ, Meegdes M, et al.The influence of porcelain layer thickness on the final shade of ceramic restorations[J]. J Prosthet Dent, 2003, 90(6): 563-570.
[5] 赵信义. 光固化灯的类型和特点[J]. 牙体牙髓牙周病学杂志, 2004, 14(8): 477-478.
[6] Rencz A, Hickel R, Ilie N.Curing efficiency of modern LED units[J]. Clin Oral Investig, 2012, 16(1): 173-179.
[7] Rueggeberg FA.State-of-the-art: dental photocuring-a review[J]. Dent Mater, 2011, 27(1): 39-52.
[8] Chandurkar AM, Metgud SS, Yakub SS,et al.Comparative evaluation of the effects of light intensities and curing cycles of QTH, and LED lights on microleakage of class V composite restorations[J]. J Clin Diagn Res, 2014, 8(3): 221-224.
[9] Haenel T, Hausnerova B, Steinhaus J, et al.Effect of the irradiance distribution from light curing units on the local micro-hardness of the surface of dental resins[J]. Dent Mater, 2015, 31(2): 93-104.
[10] Hadis M, Leprince JG, Shortall AC, et al.High irradiance curing and anomalies of exposure reciprocity law in resin-based materials[J]. J Dent, 2011, 39(8): 549-557.
[11] Barghi N, Berry T, Hatton C.Evaluating intensity output of curing lights in private dental offices[J]. J Am Dent Assoc, 1994,125(7): 992-996.

[1]	杨华旋, 陈任生, 黄家辉, 孔海影, 张林林. 铒激光预处理对牙本质、牙釉质粘结强度及CAD/CAM玻璃陶瓷嵌体修复牙体缺损边缘微渗漏的影响[J]. 上海口腔医学, 2024, 33(3): 245-249.
[2]	金夏悦, 余润平, 花葳蕾, 黄慧. 1 374例椅旁CAD/CAM全瓷修复体的类型及颜色调查[J]. 上海口腔医学, 2024, 33(2): 200-204.
[3]	徐业豪, 任碧晖, 戴婕婷, 魏洪武, 郭水根, 毛卫华. 皮质骨厚度及颌骨骨密度对种植术中疼痛的影响[J]. 上海口腔医学, 2024, 33(2): 211-218.
[4]	庄娇玲, 许志强, 金地, 吴千驹. Er-YAG激光对不同瓷贴面拆除效率的体外评价[J]. 上海口腔医学, 2023, 32(6): 578-582.
[5]	彭源浩, 庄昕仪, 喻婷, 吕冬梅, 温秀杰, 程钎. 青少年颧牙槽嵴区皮质骨厚度的锥形束CT测量及其与颈椎骨龄的相关性研究[J]. 上海口腔医学, 2023, 32(6): 623-629.
[6]	王文丽, 傅亚婷, 刘华, 马潇. 上颌前牙美学区牙龈三维形态的锥形束CT测量分析[J]. 上海口腔医学, 2023, 32(2): 177-182.
[7]	高琳, 韩祥永, 徐晓明. 不同材料及不同固位深度的髓腔固位冠修复下颌第二磨牙的三维有限元分析[J]. 上海口腔医学, 2022, 31(6): 621-624.
[8]	毛艳敏, 许衍, 罗薇, 卢芸, 刘月华. 腭侧错位的上颌侧切牙牙根位置锥形束CT测量分析[J]. 上海口腔医学, 2021, 30(2): 129-134.
[9]	陈月靖, 姚瑶, 罗傲翔. 椅旁CAD-CAM二硅酸锂玻璃陶瓷全冠的修复效果评价[J]. 上海口腔医学, 2021, 30(2): 191-195.
[10]	林晨官璐, 胡小坤, 严雨欣, 曲延慧, 刘梅, 章非敏. 2种椅旁CAD/CAM修复材料冠抗折强度的体外研究[J]. 上海口腔医学, 2021, 30(1): 7-12.
[11]	谷莉玲, 郭永锦, 程辉, 李秀容, 张贝洁. 多次烧结对二硅酸锂陶瓷后牙牙合贴面疲劳性能的影响[J]. 上海口腔医学, 2020, 29(6): 586-590.
[12]	钱慧芬, 林佳儒, 林云红, 王维琦, 李星星. 核饰瓷厚度和基底颜色对铸瓷贴面修复四环素牙光学性能的影响[J]. 上海口腔医学, 2020, 29(2): 133-137.
[13]	吴海苗，叶翠，陈栋. 不同正畸托槽粘接剂及釉质抛光方法对牙釉质着色的影响[J]. 上海口腔医学, 2018, 27(3): 257-260.
[14]	朱琳琳, 仇丽鸿, 刘丽杨, 李晓琳. 加强型玻璃陶瓷厚度对树脂水门汀固化效率的影响[J]. 上海口腔医学, 2017, 26(5): 492-497.
[15]	何少伟, 耿藤瑜, 孟翔峰. 流动性复合树脂核材料在短时超高光强照射下的聚合效果[J]. 上海口腔医学, 2016, 25(3): 261-265.

不同颜色与厚度的2种玻璃陶瓷修复体对光固化灯透射光学性能的影响

Optical properties of LED light curing unit before and after transmitting different colors and thickness of two kinds of glass ceramics

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价