3种机用镍钛锉对磨牙根管弯曲度的影响

doi:10.19439/j.sjos.2018.04.014

上海口腔医学 ›› 2018, Vol. 27 ›› Issue (4): 407-410.doi: 10.19439/j.sjos.2018.04.014

3种机用镍钛锉对磨牙根管弯曲度的影响

孟丹婕¹, 姚莉莉², 李矛¹

1.合肥市口腔医院综合科,2. 牙体牙髓病一科,安徽合肥 230001

收稿日期:2018-04-02 修回日期:2018-05-20 出版日期:2018-08-25 发布日期:2018-10-09
通讯作者: 孟丹婕, Tel:0551-62613415,E-mail：moondj2005@163.com
作者简介:孟丹婕（1982-）,女,主治医师
基金资助:
合肥市第五周期医学重点学科建设项目

Comparison of the effect of three nickel-titanium instruments on molar root canal curvature

MENG Dan-jie¹, YAO Li-li², LI Mao¹

1.Department of General Dentistry, 2.Department of Endodontics, Hefei Stomatological Hospital. Hefei 230001,Anhui Province, China

Received:2018-04-02 Revised:2018-05-20 Online:2018-08-25 Published:2018-10-09

摘要/Abstract

摘要： 目的: 评价ProTaper、Mtwo、M3 3种机用镍钛器械对磨牙根管弯曲度的影响。方法: 将45例需行根管治疗的磨牙随机分为3组,分别使用ProTaper,Mtwo,M3机用镍钛器械预备根管,对合格率及预备前、后各组根管的弯曲度变化进行测量,采用SPSS22.0软件包对数据进行统计学分析。结果: 3组器械预备根管后合格率及不同预备器械对根管弯曲度的影响均无显著差异（P>0.05),各组预备前、后根管弯曲度的变化均有统计学意义（P<0.05）。结论: 3组器械均能有效成形根管且对根管弯曲度的影响无显著差异,但预备后根管弯曲度均产生变化。在弯曲根管的成形中,需要防止弯曲根管预备并发症的发生。

关键词: 根管弯曲度, 成形能力, ProTaper锉, Mtwo锉, M3锉

Abstract: PURPOSE: To evaluate the influence of ProTaper, Mtwo, and M3 nickel-titanium instruments on root canal curvature during root canal preparation. METHODS: Forty-five molars with root canal therapy were randomly divided into 3 groups. The root canals were prepared by using ProTaper, Mtwo and M3 nickel-titanium instruments. The qualified rate and change of root canal curvature before and after preparation were compared using SPSS22.0 software package. RESULTS: There was no significant difference between the three groups in the qualification rate after root canal preparation and the effect of different preparatory devices on root canal curvature(P>0.05), but there was significant difference in the change of root canal curvature before and after preparation (P<0.05). CONCLUSIONS: The three kinds of nickel-titanium instruments can effectively form root canal and have no difference in root canal curvature, but the curvature of root canal is changed after preparation. It is important to prevent complications during curved root canal preparation.

Key words: Root canal curvature, Shaping ability, ProTaper, Mtwo, M3

中图分类号:

R781

孟丹婕, 姚莉莉, 李矛. 3种机用镍钛锉对磨牙根管弯曲度的影响[J]. 上海口腔医学, 2018, 27(4): 407-410.

MENG Dan-jie, YAO Li-li, LI Mao. Comparison of the effect of three nickel-titanium instruments on molar root canal curvature[J]. Shanghai Journal of Stomatology, 2018, 27(4): 407-410.

参考文献

[1] 中华口腔医学会牙体牙髓病专业委员会. 根管治疗技术指南[J]. 中华口腔医学杂志, 2014, 49(5): 272-274.
[2] 高学军, 岳林. 牙体牙髓病学 [M]. 第2版. 北京: 北京大学出版社, 2013: 377-380.
[3] 四川大学华西口腔医院牙体牙髓科. 根管治疗难度系数临床评估标准[J].华西口腔医学杂志, 2004, 22(5): 381-383.
[4] 顾永春, 周培刚, 刘淑香, 等. 根管弯曲度测量法的几何原理剖析[J]. 牙体牙髓牙周病学杂志, 2006, 16(8): 449-453.
[5] Lucena C, López JM, Martín JA, et al.Accuracy of working length measurement: electronic apex locator versus conebeam computed tomography[J]. Int Endod J, 2014, 47(3): 246-256.
[6] 彭彬. 牙髓病学[M]. 第2版. 北京: 人民卫生出版社, 2015: 144.
[7] Saini HR, Tewari S, Sangwan P, et al.Effect of different apical preparation sizes on outcome of primary endodonitc treatment:a randomized controlled trial[J]. J Endod, 2012, 38(10): 1309-1315.
[8] Schäfer E, Oitzinger M.Cuttinng efficiency of five different types of rotary Nickel-Titanium instruments[J]. J Endod, 2008, 34(2): 198-200.
[9] Versinai MA, Leoni GB, Steier L, et al.Micro-computed tomography study of oval-shaped canals prepared with the self-adjusting file,Reciproc,WaveOne,and Protaper universal systems[J]. J Endod, 2013, 39(8): 1060-1066.
[10] 冯春月, 贾智, 刘大勇, 等. PathFile镍钛根管预备技术在弯曲根管治疗中的临床疗效[J].天津医科大学学报, 2014, 20(3): 224-226.
[11] 闫雪冰, 肖瑶, 罗树生, 等. Hyflex CM机用镍钛锉预备磨牙弯曲根管的临床分析[J]. 实用口腔医学杂志, 2017, 33(3): 410-413.
[12] 于小青, 薛明. 根管预备过程中根尖偏移[J]. 中国实用口腔科杂志, 2015, 8(11): 641-644.
[13] 于小青, 刘宇飞, 郭世博, 等. 5种机用镍钛锉预备根管成形能力的比较研究[J]. 口腔医学研究, 2017, 33(3): 286-289.
[14] Bonaccorso A, Cantatore G, Condorelli GG, et al.Shaping ability of four nickel-titanium rotary instruments in simulated S-shaped canals[J]. J Endod, 2009, 35(6): 883-886.
[15] 韩俊, 高恒, 潘魏红. Pathfile和Mtwo 联合应用于预备弯曲根管的临床评价[J]. 华中科技大学学报(医学版), 2014, 8(4): 453-455.
[16] 郑庆华, 李文, 黄定明. 恒牙根管弯曲的解剖学特征[J]. 国际口腔医学杂志, 2010, 37(3): 317-319.

3种机用镍钛锉对磨牙根管弯曲度的影响

Comparison of the effect of three nickel-titanium instruments on molar root canal curvature

PDF (PC)

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 5

编辑推荐

Metrics

本文评价

[1]	梁昭璜, 张瑶. 4种机用镍钛器械预备树脂模拟弯曲根管成形能力比较[J]. 上海口腔医学, 2024, 33(1): 54-58.
[2]	封菲, 曹立群, 张旗. XP-endo Shaper和ProTaper Next对弯曲根管成形能力及微裂纹形成的影响[J]. 上海口腔医学, 2023, 32(3): 225-229.
[3]	杨笑晗, 杨旭. 3种往复旋转单支镍钛器械预备模拟弯曲根管的效果比较[J]. 上海口腔医学, 2021, 30(6): 595-598.
[4]	仇宁，王楚瑜，刘宇飞，于小青，薛明. 3种机用镍钛器械预备模拟弯曲根管的成形能力比较[J]. 上海口腔医学, 2016, 25(2): 191-194.
[5]	顾永春, 倪龙兴. 2061支临床废弃手用ProTaper锉的损伤分析[J]. 上海口腔医学, 2013, 22(5): 528-532.