Types and colors of 1 374 chair-side CAD/CAM all-ceramic restorations

doi:10.19439/j.sjos.2024.02.017

Abstract

Abstract: PURPOSE: To analyse the types of chairside CAD/CAM all-ceramic restorations and the color range of all-ceramic materials used so as to provide reference for the application of clinical chairside all-ceramic restoration and the color selection of all-ceramic materials. METHODS: IPS e.max CAD prostheses and related data were collected from January 2021 to December 2021 from the Department of Prosthodontics, Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine. The number and type of restorations and the color of materials were investigated and analyzed by descriptive statistics. RESULTS: A total of 1 374 restorations were included, of which 624 were crown restorations, accounting for 45.41% of the total restorations. 516 cases were veneer, accounting for 37.55%; 219 were inlays, accounting for 15.94%; fixed bridges were all adhesive bridges, with the least number with only 15 cases, accounting for 1.09%. In terms of the selection of restoration materials, the use rate of low-transparent(LT) ceramic blocks was significantly higher than that of other transparent ceramic blocks. A was the most frequently used ceramic color. The most frequently used porcelain blocks for veneers were LTA2 and LTA1; for inlay were LTA3; for crowns were LTA2 and LTA3. The blocks used in the fixed bridges were all LT, and A3 color was the majority. CONCLUSIONS: Chairside CAD/CAM all-ceramic prostheses made of IPS e.max CAD materials have been widely used in clinical practice. The types of prostheses include veneer, inset, crown and fixed bridge. The most commonly used IPS e.max CAD blocks are LTA2, LTA3 and LTA1. These findings have certain guiding significance for the clinical restoration decision and the reserve of porcelain blocks in primary hospitals.

Key words: Chairside CAD/CAM, IPS e.max CAD, Lithium disilicate glass ceramics, Transparency

CLC Number:

R783.6

JIN Xia-yue, YU Run-ping, HUA Wei-lei, HUANG Hui. Types and colors of 1 374 chair-side CAD/CAM all-ceramic restorations[J]. Shanghai Journal of Stomatology, 2024, 33(2): 200-204.

References

[1] Davidowitz G, Kotick PG.The use of CAD/CAM in dentistry[J]. Dent Clin North Am, 2011, 55(3): 559-570.
[2] Mörmann WH.The evolution of the CEREC system[J]. J Am Dent Assoc, 2006, 137(Suppl): 7S-13S.
[3] Stutes RD.椅旁CAD/CAM牙科修复系统的历史与临床应用现状[J]. 上海口腔医学, 2006, 15(5): 449-455.
[4] 杨雪蕊. Cerec AC椅旁CAD/CAM全瓷修复体临床疗效研究[D]. 西安: 第四军医大学, 2017.
[5] Sulaiman TA.Materials in digital dentistry-a review[J]. J Esthet Restor Dent, 2020, 32(2): 171-181.
[6] Arif R, Yilmaz B, Johnston WM.In vitro color stainability and relative translucency of CAD-CAM restorative materials used for laminate veneers and complete crowns[J]. J Prosthet Dent, 2019, 122(2): 160-166.
[7] 王萍, 马骏驰, 胡建, 等. 椅旁CAD/CAM(CEREC AC^TM)全瓷修复的临床回顾性研究[J]. 口腔医学, 2016, 36(12): 1098-1103, 1117.
[8] Munoz-Sanchez ML, Bessadet M, Lance C, et al.Survival rate of CAD-CAM endocrowns performed by undergraduate students[J]. Oper Dent, 2021, 46(5): 505-515.
[9] Nejatidanesh F, Savabi G, Amjadi M, et al.Five year clinical outcomes and survival of chairside CAD/CAM ceramic laminate veneers-a retrospective study[J]. J Prosthodont Res, 2018, 62(4): 462-467.
[10] Lu T, Peng L, Xiong F, et al.A 3-year clinical evaluation of endodontically treated posterior teeth restored with two different materials using the CEREC AC chair-side system[J]. J Prosthet Dent, 2018, 119(3): 363-368.
[11] Nejatidanesh F, Amjadi M, Akouchekian M, et al.Clinical performance of CEREC AC bluecam conservative ceramic restorations after five years-a retrospective study[J]. J Dent, 2015, 43(9): 1076-1082.
[12] 刘诗铭, 刘峰. 椅旁CAD/CAM修复材料分类和新进展[J]. 口腔医学, 2017, 37(8): 673-677.
[13] Altier M, Erol F, Yildirim G, et al.Fracture resistance and failure modes of lithium disilicate or composite endocrowns[J]. Niger J Clin Pract, 2018, 21(7): 821-826.
[14] Furtado De Mendonca A, Shahmoradi M, Gouvêa CVD, et al. Microstructural and mechanical characterization of CAD/CAM materials for monolithic dental restorations[J]. J Prosthodont, 2019, 28(2): e587-e594.
[15] Goujat A, Abouelleil H, Colon P, et al.Mechanical properties and internal fit of 4 CAD-CAM block materials[J]. J Prosthet Dent, 2018, 119(3): 384-389.
[16] Lawson NC, Bansal R, Burgess JO.Wear, strength, modulus and hardness of CAD/CAM restorative materials[J]. Dent Mater, 2016, 32(11): e275-e283.
[17] 郭晓钰, 陈慧芬, 徐秀清, 等. Cerec口腔椅旁CAD/CAM数字化修复临床疗效及常见术后并发症浅析[J]. 口腔医学, 2018, 38(10): 947-950.
[18] Chen SE, Park AC, Wang J, et al.Fracture resistance of various thickness e.Max CAD lithium disilicate crowns cemented on different supporting substrates: an in vitro study[J]. J Prosthodont, 2019, 28(9): 997-1004.
[19] 赵昕, 战德松. CAD/CAM系统及可切削材料在口腔修复的应用现状[J]. 中国实用口腔科杂志, 2013, 6(6): 331-337.
[20] Willard A, Gabriel Chu TM.The science and application of IPS e.Max dental ceramic[J]. Kaohsiung J Med Sci, 2018, 34(4): 238-242.
[21] Vichi A, Carrabba M, Paravina R, et al.Translucency of ceramic materials for cerec CAD/CAM system[J]. J Esthet Restor Dent, 2014, 26(4): 224-231.
[22] Corciolani G, Vichi A, Louca C, et al.Influence of layering thickness on the color parameters of a ceramic system[J]. Dent Mater, 2010, 26(8): 737-742.
[23] Al Ben Ali A, Kang K, Finkelman MD, et al. The effect of variations in translucency and background on color differences in CAD/CAM lithium disilicate glass ceramics[J]. J Prosthodont, 2014, 23(3): 213-220.
[24] 郭航, 王峰, 冯化端, 等. 4 340例烤瓷修复体选色调查[J]. 华西口腔医学杂志, 2000, 18(3): 174-177.
[25] Da Cunha LF, Pedroche LO, Gonzaga CC, et al.Esthetic, occlusal, and periodontal rehabilitation of anterior teeth with minimum thickness porcelain laminate veneers[J]. J Prosthet Dent, 2014, 112(6): 1315-1318.
[26] 王辰昕, 甘红, 林鑫毅, 等. 上海地区汉族青年人群恒前牙体部颜色特征临床研究[J]. 口腔颌面修复学杂志, 2016, 17(2): 91-95.
[27] 甘云娜, 王忠义, 沈丽娟, 等. 西安市居民上颌前牙天然色度值的采集和分析[J]. 牙体牙髓牙周病学杂志, 2004, 14(8): 443-445.
[28] 陈玲. 四川地区中国人群天然牙与比色板的色度学研究[D]. 成都: 四川大学, 2005.
[29] 陈芳, 邵江红. 北京地区人群天然牙色度调查研究[J]. 中国药物与临床, 2015, 15(6): 786-787.