3D打印技术在口腔颌面-头颈肿瘤外科教学中的应用

上海口腔医学 ›› 2016, Vol. 25 ›› Issue (6): 762-765.

3D打印技术在口腔颌面-头颈肿瘤外科教学中的应用

阮敏, 季彤, 张陈平

上海交通大学医学院附属第九人民医院·口腔医学院口腔颌面-头颈肿瘤科, 上海市口腔医学重点实验室,上海 200011

收稿日期:2016-05-16 出版日期:2016-12-25 发布日期:2016-12-29
通讯作者: 张陈平,E-mail：zhangchenping@hotmail.com
作者简介:阮敏（1978-）,男,博士,副主任医师,硕士研究生导师,E-mail：doctorruanmin@hotmail.com
基金资助:
国家自然科学基金（81102049、81472517）; 上海市浦江人才计划（15PJD024）; 上海交通大学SMG-晨星青年学者奖励基金

Applications of 3D printing technology in teaching of oromaxillofacial head and neck surgical oncology

RUAN Min, JI Tong, ZHANG Chen-ping

Department of Oromaxillofacial Head and Neck Oncology, Shanghai Ninth People's Hospital, College of Stomatology, Shanghai Jiao Tong University School of Medicine; Shanghai Key Laboratory of Stomatology. Shanghai 200011, China

Received:2016-05-16 Online:2016-12-25 Published:2016-12-29

摘要/Abstract

摘要： [提要] 随着3D打印技术的日益成熟及其在各行业领域极具潜力的革命性应用,如何将3D打印技术引入临床医学教育是当前医学教育的一个重要课题。口腔颌面-头颈肿瘤外科教学内容繁多复杂、教学难度大,教学过程中存在学生理解记忆效果差、实践操作能力培训不足等问题。为克服传统教学的缺点,可尝试将3D打印辅助教学模式引入口腔颌面-头颈肿瘤外科教学实践,提高口腔颌面-头颈肿瘤外科的教学质量及解决临床实际问题的能力,促进口腔颌面-头颈肿瘤外科技能型及创新型人才的培养。

关键词: 3D 打印, 口腔颌面-头颈肿瘤外科, 教学方法, 人才培养

Abstract: [Summary] With the increasing maturation of 3D printing technology, as well as its application in various industries, investigation of 3D printing technology into clinic medical education becomes an important task of the current medical education. The teaching content of oromaxillofacial head and neck surgical oncology is complicated and diverse, making lower understanding/memorizing efficiency and insufficient skill training. To overcome the disadvantage of traditional teaching method, it is necessary to introduce 3D printing technique into teaching of oromaxillofacial head and neck surgical oncology, in order to improve the teaching quality and problem solving capabilities, and finally promote cultivation of skilled and innovative talents.

Key words: 3D printing, Oromaxillofacial head and neck surgical oncology, Teaching methods, Cultivation of talents

中图分类号:

G642.4

阮敏, 季彤, 张陈平. 3D打印技术在口腔颌面-头颈肿瘤外科教学中的应用[J]. 上海口腔医学, 2016, 25(6): 762-765.

RUAN Min, JI Tong, ZHANG Chen-ping. Applications of 3D printing technology in teaching of oromaxillofacial head and neck surgical oncology[J]. Shanghai Journal of Stomatology, 2016, 25(6): 762-765.

参考文献

[1] Fullerton JN, Frodsham GC, Day RM. 3D printing for the many, not the few [J]. Nat Biotechnol, 2014, 32(11): 1086-1087.
[2] 李青, 王青. 3D 打印: 一种新兴的学习技术 [J].远程教育杂志, 2013, 31(4): 29-35.
[3] 杨洁, 刘瑞儒, 霍惠芳. 3D 打印在教育中的创新应用 [J]. 中国医学教育技术, 2014, 28(1): 10-12.
[4] 黎加厚, 杨晓哲, 杨高云. 三维打印技术的发展对教育的启迪 [J]. 中国医学教育技术, 2013, 27(1): 1-5.
[5] 杨长伟, 何大为, 陈自强, 等. 基于三维打印技术的骨科教学模型设计及教学实施体会 [J].中国医学教育技术, 2015, 29(5): 550-552.
[6] 兀旦辉, 赵晨飞. 3D 打印技术在教学中的应用研究[J]. 课程教育研究, 2013, 2(21): 185-186.
[7] Rengier F, Mehndiratta A, von Tengg-Kobligk H, et al. 3D printing based on imaging data: review of medical applications [J]. Int J Comput Assist Radiol Surg, 2010, 5(4): 335-341.
[8] Waran V, Narayanan V, Karuppiah R, et al. Neurosurgical endoscopic training via a realistic 3-dimensional model with pathology [J]. Simul Healthc, 2015, 10(1): 43-48.
[9] Waran V, Narayanan V, Karuppiah R, et al. Utility of multimaterial 3D printers in creating models with pathological entities to enhance the training experience of neurosurgeons [J]. J Neurosurg, 2014, 120(2): 489-492.
[10] Costello JP, Olivieri LJ, Su L, et al. Incorporating three-dimensional printing into a simulation-based congenital heart disease and critical care training curriculum for resident physicians [J]. Congenit Heart Dis, 2015, 10(2): 185-190.
[11] 王栋, 赵波, 李锋涛, 等. 上颈椎3 D打印模型在骨科规范化培训教育中的应用 [J]. 中国继续医学教育, 2015, 7(19): 23-24.
[12] Rankin TM, Giovinco NA, Cucher DJ, et al. Three-dimensional printing surgical instruments: are we there yet?[J]. J Surg Res, 2014, 189(2):193-197.