前方牵引矫治器不同力值反作用力的三维有限元分析

上海口腔医学 ›› 2013, Vol. 22 ›› Issue (5): 498-503.

前方牵引矫治器不同力值反作用力的三维有限元分析

刘宛鑫¹，王旭霞^1,2，张文娟³，董瑞¹，陈云¹，张君^1,2

(1.山东大学口腔医学院，山东济南 250012；2.山东省口腔生物医学重点实验室，山东济南 250012；3.山东省中医药大学附属医院口腔科，山东济南 250011)

收稿日期:2013-04-15 修回日期:2013-05-03 出版日期:2013-10-10 发布日期:2013-10-10
通讯作者: 张君，Tel：0531-88382070，E-mail：zhangj@sdu.edu.cn
作者简介:刘宛鑫(1987-)，女，在读硕士研究生，E-mail：452781001@qq.com
基金资助:
山东省自然科学基金(ZR2011HM036)；山东省医药卫生科技发展计划项目(2011QZ023)；济南市高校院所自主创新计划项目(201202032)

A three-dimensional finite element study on the reaction of different force values generated from maxillary protraction appliance

LIU Wan-xin¹, WANG Xu-xia^1,2, ZHANG Wen-juan³, DONG Rui¹, CHEN Yun¹, ZHANG Jun^1,2

1.School of Stomatology, Shandong University. Jinan 250012; 2.Shandong Provincial Key Laboratory of Oral Biomedicine. Jinan 250012; 3.Deportment of Stomatology, Affiliated Hospital of Shandong University of Traditional Chinese Medicine. Jinan 250011, Shandong Province, China

Received:2013-04-15 Revised:2013-05-03 Online:2013-10-10 Published:2013-10-10
Supported by:
Supported by Natural Science Foundation of Shandong Province(ZR2011HM036), Medical Health and Technology Development Project(2011QZ023) of Shandong Province and Independent Innovation Project of Jinan College Institute(201202032).

摘要/Abstract

摘要： 目的：通过建立包含颞下颌关节的颅颌面三维有限元模型，模拟前方牵引矫治器反作用力的加力方式，分析其在颞下颌关节区、颌骨的应力分布情况以及对各部位节点位移的影响。方法：选择1名健康男性受试者，通过CT扫描得到颅颌面的二维图像数据，借助Mimics、Magics、MSC等专用软件，采用连续、均质、线性、各向同性的线弹性材料，建立包括颞下颌关节和上、下颌骨的颅颌面三维有限元模型。然后在此基础上，根据前方牵引装置的反作用力原理建立加力模型，即采用与平面成后上方37°的施力方向，于下颌最底部加载3~6 N的力值，采用ANSYS10.0有限元分析软件，测定颞下颌关节区、颌骨的应力分布情况以及各部分位移的变化，并对结果进行分析、归纳和整理。结果：在同一角度下，关节窝和髁突头、颈部应力随加载力的增大而增大，下颌最大应力出现在节点力加载部位颏部，上颌最大应力出现在刚性固定面。同时该模型出现微小的位移变化，颅颌面各部分位移随节点力的增大而增大，颅上颌位移由颅底部和平面向颅顶部逐渐减小，下颌骨的位移由前部到后部逐渐减小，并出现顺时针方向旋转。结论：前方牵引矫治器对颞下颌关节区及颌骨产生反作用力的影响，且随着加载力的增大，其产生的反作用力和形变随之增大。颏部可能出现变形，下颌顺时针方向旋转。

关键词: 三维有限元, 颞下颌关节, 前方牵引, 反作用力

Abstract: PURPOSE: To analyse the stress distribution of temporomandibular joint(TMJ) and jaw and the displacement changes of each part from the reaction force generated from maxillary protraction appliance by establishing a craniomaxillofacial three-dimensional finite element model (3-D FEM). METHODS: A 3-D FEM of craniofacial structure including TMJ and jaw was established from a male healthy subject by using CT scan and Mimics, Magics, MSC and other data analysis softwares. It was based on the linear elastic materials which were continuous, homogeneous, and isotropic. Then the simulation model in craniofacial 3D structure model of maxillary protraction device was establish based on the reaction principle, and different forces from 3 N to 6 N with a 37° angle from the occlusal plane was loaded at the bottom of the lower jaw in order to measure and analyze changes of stress and displacement in TMJ and jaw with the finite element analysis software ANSYS10.0. RESULTS: At the same angle , the stress in articular fossa and the head and neck of condyle increased with the applied force. Maximum stress was located where the stress was loaded on the mandible and the rigid fixation of maxilla. Meanwhile, this model appeared slight variation of displacement which increased with loading force. The maxillary displacement from basis cranii and occlusal plane to the parietal decreased gradually. Moreover, the mandibular displacement from the front to the rear was gradually reduced, and clockwise rotation was appeared. CONCLUSIONS: The results indicate that maxillary protraction appliance has reaction force on TMJ and jaw. With increasing of loading forces, reaction forces and deformation increase. At the same time, chin deformation may occur and the mandible has clockwise rotation.

Key words: 3-D FEM, TMJ, Protraction, Reaction force

中图分类号:

R783.5

刘宛鑫, 王旭霞, 张文娟, 董瑞, 陈云, 张君,. 前方牵引矫治器不同力值反作用力的三维有限元分析[J]. 上海口腔医学, 2013, 22(5): 498-503.

LIU Wan-xin, WANG Xu-xia, ZHANG Wen-juan, DONG Rui, CHEN Yun, ZHANG Jun,. A three-dimensional finite element study on the reaction of different force values generated from maxillary protraction appliance[J]. Shanghai Journal of Stomatology, 2013, 22(5): 498-503.

参考文献

[1] 陈林玲, 杨一鸣, 嵇国平. 恒牙早期Ⅲ类错上颌前方牵引的疗效观察[J]. 上海口腔医学, 2008, 17(1): 25-29.
[2] Sameshim GT, Melnick M. Finite element-based cephalometric analysis[J]. Angle Orthod, 1994, 64(5): 343-350.
[3] Tanne K, Sakuda M, Burstone CJ. Three-dimensional finite element analysis for stress in the periodontal tissue by orthodontic forces[J]. Am J Orthod Dentofacial Orthop,1987,92(6): 499-505.
[4] Liu Z, Fan Y, Qian Y. Comparative evaluation on three-dimensional finite element models of the temporomandibular joint[J]. Clin Biomech (Bristol, Avon), 2008, 23(Suppl 1): S53-58.
[5] 张晓慧,丁寅,刘冬,等.颅上颌复合体三维有限元模型的建立[J]. 中国美容医学, 2005, 14(2): 194-196.
[6] Kim HS, Park JY, Kim NE, et al. Finite element modeling technique for predicting mechanical behaviors on mandible bone during mastication[J]. J Adv Prosthodont, 2012, 4(4): 218-226.
[7] 张君, 王旭霞, 马士良, 等. 埋伏牙牙周应力分布的三维有限元分析[J]. 华西口腔医学杂志, 2008, 26(1): 19-22.
[8] 靳淑梅, 王旭霞, 张丽娜, 等. 不同工况下埋伏牙的位移趋势及牙周应力的三维有限元分析[J]. 山东大学学报(医学版), 2010, 48(12): 67-74.
[9] Nagasao T, Kobayashi M, Tsuchiya Y, et al. Finite element analysis of the stresses around endosseous implants in various reconstructed mandibular models[J]. J Craniomaxillofac Surg, 2002, 30(3): 170-177.
[10] 周学军, 赵志河, 赵美英, 等. 颞下颌关节-下颌骨-颏兜矫形系统三维正交各向异性有限元模型的建立[J]. 口腔医学, 2004, 24(6): 325-327.
[11] 张彤. 颅面复合体三维有限元模型的建立及上颌前牵引的生物力学研究[D]. 北京: 中国人民解放军军医进修学院, 2007: 11-41.
[12] Delaire J. Maxillary development revisited: relevance to the orthopedic treatment of Class III malocclusions[J]. Eur J Orthod, 1997, 19(3): 289- 311.
[13] Chen L, Chen R, Yang Y, et al. The effects of maxillary protraction and its long-term stability-a clinical trial in Chinese adolescents[J]. Eur J Orthod, 2012, 34(1): 88-95.
[14] Tanne K, Miyasaka J, Yamagata Y, et al. Three-dimensional model of the human craniofacial skeleton: method and preliminary results using finite element analysis[J]. J Biomed Eng, 1988, 10(3): 246-252.
[15] 侯敏, 柳春明, 张海钟. 颅面复合体三维有限元法分析的研究进展[J]. 国外医学?口腔医学分册, 2004, 31(5): 408-410.
[16] 沙焱, 邓瑛, 傅石雨, 等. 前方牵引下颅面复合体骨缝应力特征的三维有限元分析[J]. 上海口腔医学, 2009, 18(3): 277-281.
[17] 邹敏, 林伟就. 不同前方牵引力对颅上颌复合体影响的有限元分析[J]. 上海口腔医学, 2011, 20(1): 88-92.
[18] Gautam P, Valiathan A, Adhikari R. Maxillary protraction with and without maxillary expansion: a finite element analysis of sutural stresses[J]. Am J Orthod Dentofacial Orthop,2009,136(3): 361-366.
[19] 李霞. 上颌前方牵引联合上腭快速扩大对骨性安氏Ш类错患者的颅面结构和上气道间隙的影响[D]. 吉林: 吉林大学, 2004: 9-10.
[20] 赵志河,赵美英.上颌复合体及上颌牙弓阻力中心位置的研究[J]. 口腔正畸学杂志, 1994, 1(1): 25-26.