Optical properties of LED light curing unit before and after transmitting different colors and thickness of two kinds of glass ceramics

doi:10.19439/j.sjos.2020.01.003

Abstract

Abstract: PURPOSE: To study the optical properties of two common dental light curing units and the optical properties of the transmitted light after transmitting glass ceramics. METHODS: Two types of glass-ceramic disc named IPS e.max CAD and IPS Empress CAD were produced by CAD/CAM technology, and the colors of A2 and A3 were chosen for each type of glass ceramic, then divided into 4 groups. Eight discs were made 0.5 mm to 4.0 mm thick in each group, the total number was 32. Spectra irradiance meter and power meter were used to measure the central wavelengths and irradiance of 3 power modes of 2 new LED light curing units before and after transmitting glass-ceramic discs. Statistical analysis was performed using SPSS 25.0 software package. RESULTS: Under different power modes of light curing units, different types and colors of glass ceramics, the central wavelengths of transmitted light were significantly different (P<; 0.05). Under different power modes of light curing units, different types, colors and thicknesses of glass ceramics, the irradiance of transmitted light was significantly different (P<; 0.05). CONCLUSIONS: The power mode of light curing unit, the type and color of the glass ceramic have influence on the central wavelength of the transmitted light, but the thickness of the glass ceramic has no influence on the central wavelength of the transmitted light. The power mode of the light curing unit, the type, color, and thickness of the glass ceramic have influence on the irradiance of the transmitted light, in which glass ceramic thickness has the most significant effect on the attenuation of the irradiance of the transmitted light.

Key words: LED light curing unit, Central wavelength, Irradiance, Glass ceramic, Shade, Thickness

CLC Number:

R783.1

LIN Hong-lei, LI Qi, YU Hao, HUANG Zheng, ZHENG Ming, CHENG Hui. Optical properties of LED light curing unit before and after transmitting different colors and thickness of two kinds of glass ceramics[J]. Shanghai Journal of Stomatology, 2020, 29(1): 13-18.

References

[1] Öztürk E, Bolay S, Hickel R, et al.Shear bond strength of porcelain laminate veneers to enamel, dentine and enamel-dentine complex bonded with different adhesive luting systems[J]. J Dent, 2013, 41(2): 97-105.
[2] Kuguimiya RN, Rode KM, Carneiro PM, et al.Influence of curing units and indirect restorative materials on the hardness of two dual-curing resin cements evaluated by the nanoindentation test[J]. J Adhes Dent, 2015,17(3): 243-248.
[3] 林晓丽, 于皓, 林泓磊, 等. 口腔临床5种常用光固化灯光学性能的研究[J]. 口腔医学研究, 2016, 32(4): 383-387.
[4] Dozic A, Kleverlaan CJ, Meegdes M, et al.The influence of porcelain layer thickness on the final shade of ceramic restorations[J]. J Prosthet Dent, 2003, 90(6): 563-570.
[5] 赵信义. 光固化灯的类型和特点[J]. 牙体牙髓牙周病学杂志, 2004, 14(8): 477-478.
[6] Rencz A, Hickel R, Ilie N.Curing efficiency of modern LED units[J]. Clin Oral Investig, 2012, 16(1): 173-179.
[7] Rueggeberg FA.State-of-the-art: dental photocuring-a review[J]. Dent Mater, 2011, 27(1): 39-52.
[8] Chandurkar AM, Metgud SS, Yakub SS,et al.Comparative evaluation of the effects of light intensities and curing cycles of QTH, and LED lights on microleakage of class V composite restorations[J]. J Clin Diagn Res, 2014, 8(3): 221-224.
[9] Haenel T, Hausnerova B, Steinhaus J, et al.Effect of the irradiance distribution from light curing units on the local micro-hardness of the surface of dental resins[J]. Dent Mater, 2015, 31(2): 93-104.
[10] Hadis M, Leprince JG, Shortall AC, et al.High irradiance curing and anomalies of exposure reciprocity law in resin-based materials[J]. J Dent, 2011, 39(8): 549-557.
[11] Barghi N, Berry T, Hatton C.Evaluating intensity output of curing lights in private dental offices[J]. J Am Dent Assoc, 1994,125(7): 992-996.

[1]	JIN Xia-yue, YU Run-ping, HUA Wei-lei, HUANG Hui. Types and colors of 1 374 chair-side CAD/CAM all-ceramic restorations [J]. Shanghai Journal of Stomatology, 2024, 33(2): 200-204.
[2]	XU Ye-hao, REN Bi-hui, DAI Jie-ting, WEI Hong-wu, GUO Shui-gen, MAO Wei-hua. Effects of cortical bone thickness and jaw bone density on pain during implant surgery [J]. Shanghai Journal of Stomatology, 2024, 33(2): 211-218.
[3]	PENG Yuan-hao, ZHUANG Xin-yi, YU Ting, LYU Dong-mei, WEN Xiu-jie, CHENG Qian. Measurement of cortical bone thickness of zygomatic alveolar ridge in adolescents by Cone-beam CT and its correlation with cervical vertebral bone age [J]. Shanghai Journal of Stomatology, 2023, 32(6): 623-629.
[4]	WANG Wen-li, FU Ya-ting, LIU Hua, MA Xiao. Three-dimensional gingival morphology in the aesthetic zone of maxillary anterior teeth: a cone-beam CT analysis [J]. Shanghai Journal of Stomatology, 2023, 32(2): 177-182.
[5]	GAO Lin, HAN Xiang-yong, XU Xiao-ming. Three-dimensional finite element analysis of three-material endocrown in the restoration of dental defects of mandibular second molars [J]. Shanghai Journal of Stomatology, 2022, 31(6): 621-624.
[6]	MAO Yan-min, XU Yan, LUO Wei, LU Yun, LIU Yue-hua. Study of the root position of palatally malposed maxillary lateral incisor based on cone-beam CT images [J]. Shanghai Journal of Stomatology, 2021, 30(2): 129-134.
[7]	LIN Chen-guan-lu, HU Xiao-kun, YAN Yu-xin, QU Yan-hui, LIU Mei, ZHANG Fei-min. Comparison of fracture strength of two chairside CAD/CAM ceramic blocs with different thickness [J]. Shanghai Journal of Stomatology, 2021, 30(1): 7-12.
[8]	GU Li-ling, GUO Yong-jin, CHENG Hui, LI Xiu-rong, ZHANG Bei-jie. Effect of repeated firings on fatigue behaviors of posterior occlusal veneers made of glass ceramic [J]. Shanghai Journal of Stomatology, 2020, 29(6): 586-590.
[9]	QIAN Hui-fen, LIN Jia-ru, LIN Yun-hong, WANG Wei-qi, LI Xing-xing. Effect of porcelain thickness and substrate on optical properties of porcelain veneers for tetracycline stained teeth [J]. Shanghai Journal of Stomatology, 2020, 29(2): 133-137.
[10]	XU Xiao-ming, LIU Yue-hua. Retrospective study on clinical diagnosis and treatment of 11675 cases with oral prosthodontics [J]. Shanghai Journal of Stomatology, 2019, 28(3): 301-306.
[11]	ZHU Lin-lin, QIU Li-hong, LIU Li-yang, LI Xiao-lin. Effect of the thickness of reinforced glass ceramics on the degree of conversion of dual-cure resin cements [J]. Shanghai Journal of Stomatology, 2017, 26(5): 492-497.
[12]	XIA Wen-qian, GU Yong-jia, GAO Mei-qin.. Morphological characteristics of upper alveolar bone around central incisor in Class Ⅱ division 1 and division 2 malocclusion on cone-beam CT [J]. Shanghai Journal of Stomatology, 2016, 25(1): 68-71.
[13]	JIANG Jie,ZHANG Xin,GAO Mei-qin,ZHANG Fei-min,LU Xiao-li. The effect of core veneer thickness ratio on the flexural strength of diatomite-based dental ceramic [J]. Shanghai Journal of Stomatology, 2015, 24(3): 298-301.
[14]	GU Yong-jia,LU Sheng-nan,XIA Wen-qian,ZHANG Ting,SHI Hui,GAO Mei-qin. A study on the thickness of buccal bone in the mandible of different vertical facial type in adults using cone-beam CT [J]. Shanghai Journal of Stomatology, 2015, 24(3): 335-337.
[15]	JIA Xiao-shi,ZHANG Qiu-xia,XU Meng-jie,WANG Meng,ZHANG Peng. The labial and palatal bone thickness in 67 young adults with normal occlusion at the maxillary anterior teeth measured by cone-beam computed tomography [J]. Shanghai Journal of Stomatology, 2015, 24(2): 199-205.